首页 |元器件品牌

1206YD125MAT9A [KYOCERA AVX]

Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X5R, 15% TC, 1.2uF, Surface Mount, 1206, CHIP;
1206YD125MAT9A
型号： 1206YD125MAT9A
厂家： KYOCERA AVX    KYOCERA AVX
描述：

Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X5R, 15% TC, 1.2uF, Surface Mount, 1206, CHIP
文件： 总3页 (文件大小：60K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
X5R Dielectric  
General Specifications  
GENERAL DESCRIPTION  
• General Purpose Dielectric for Ceramic Capacitors  
• EIA Class II Dielectric  
• Temperature variation of capacitance is within ±±15  
from -11°C to +81°C  
• Well suited for decoupling and filtering applications  
• Available in High Capacitance values (up to ±00µF)  
PART NUMBER (see page 2 for complete part number explanation)  
2220  
6
D
107  
M
A
T
2
A
Size  
(L" x W")  
Voltage  
4 = 4V  
6 = 6.3V  
Z = ±0V  
Y = ±6V  
3 = 21V  
D = 31V  
Dielectric  
D = X1R  
Capacitance Capacitance  
Failure  
Rate  
A = N/A  
Special  
Code  
A = Std.  
Terminations  
T = Plated Ni  
and Sn  
Packaging  
2 = 7" Reel  
4 = ±3" Reel  
7 = Bulk Cass.  
9 = Bulk  
Code (In pF)  
2 Sig. Digits +  
Number of  
Zeros  
Tolerance  
K = ±±05  
M = ±205  
TYPICAL ELECTRICAL CHARACTERISTICS  
Temperature Coefficient  
Insulation Resistance vs Temperature  
10,000  
1,000  
100  
20  
15  
10  
5
0
-5  
-10  
-15  
-20  
0
-60 -40  
-20  
0
+20 +40 +60 +80  
0
20  
40  
60  
80  
100  
120  
Temperature °C  
Temperature °C  
15  
X5R Dielectric  
Specifications and Test Methods  
Parameter/Test  
Operating Temperature Range  
Capacitance  
X5R Specification Limits  
Measuring Conditions  
Temperature Cycle Chamber  
-11ºC to +81ºC  
Within specified tolerance  
≤ 2.15 for ≥ 10V DC rating  
≤ 3.05 for 21V DC rating  
≤ 3.15 for ±6V DC rating  
≤ 1.05 for ≤ ±0V DC rating  
±00,000MΩ or 100MΩ - µF,  
whichever is less  
Freq.: ±.0 kHz ± ±05  
Voltage: ±.0Vrms ± .2V  
For Cap > ±0 µF, 0.1Vrms @ ±20Hz  
Dissipation Factor  
Charge device with rated voltage for  
60 ± 1 secs @ room temp/humidity  
Charge device with 3005 of rated voltage for  
±-1 seconds, w/charge and discharge current  
limited to 10 mA (max)  
Insulation Resistance  
Dielectric Strength  
No breakdown or visual defects  
Appearance  
Capacitance  
Variation  
Dissipation  
Factor  
No defects  
Deflection: 2mm  
Test Time: 30 seconds  
≤ ±±25  
Resistance to  
Flexure  
1mm/sec  
Meets Initial Values (As Above)  
Stresses  
Insulation  
Resistance  
≥ Initial Value x 0.3  
90 mm  
≥ 915 of each terminal should be covered  
with fresh solder  
Dip device in eutectic solder at 230 ± 1ºC  
for 1.0 ± 0.1 seconds  
Solderability  
Appearance  
Capacitance  
Variation  
Dissipation  
Factor  
Insulation  
Resistance  
Dielectric  
Strength  
Appearance  
Capacitance  
Variation  
No defects, <215 leaching of either end terminal  
≤ ±7.15  
Dip device in eutectic solder at 260ºC for 60  
seconds. Store at room temperature for 24 ± 2  
hours before measuring electrical properties.  
Resistance to  
Solder Heat  
Meets Initial Values (As Above)  
Meets Initial Values (As Above)  
Meets Initial Values (As Above)  
No visual defects  
≤ ±7.15  
Step ±: -11ºC ± 2º  
Step 2: Room Temp  
30 ± 3 minutes  
≤ 3 minutes  
Dissipation  
Factor  
Insulation  
Resistance  
Dielectric  
Strength  
Appearance  
Capacitance  
Variation  
Dissipation  
Factor  
Insulation  
Resistance  
Dielectric  
Strength  
Appearance  
Capacitance  
Variation  
Dissipation  
Factor  
Insulation  
Resistance  
Dielectric  
Strength  
Thermal  
Shock  
Meets Initial Values (As Above)  
Meets Initial Values (As Above)  
Step 3: +81ºC ± 2º  
Step 4: Room Temp  
30 ± 3 minutes  
≤ 3 minutes  
Repeat for 1 cycles and measure after  
24 ± 2 hours at room temperature  
Meets Initial Values (As Above)  
No visual defects  
Charge device with twice rated voltage in  
test chamber set at 81ºC ± 2ºC  
for ±000 hours (+48, -0)  
≤ ±±2.15  
≤ Initial Value x 2.0 (See Above)  
≥ Initial Value x 0.3 (See Above)  
Load Life  
Remove from test chamber and stabilize  
at room temperature for 24 ± 2 hours  
before measuring.  
Meets Initial Values (As Above)  
No visual defects  
Store in a test chamber set at 81ºC ± 2ºC/  
815 ± 15 relative humidity for ±000 hours  
(+48, -0) with rated voltage applied.  
≤ ±±2.15  
Load  
Humidity  
≤ Initial Value x 2.0 (See Above)  
≥ Initial Value x 0.3 (See Above)  
Meets Initial Values (As Above)  
Remove from chamber and stabilize at  
room temperature and humidity for  
24 ± 2 hours before measuring.  
16  
X5R Dielectric  
Capacitance Range  
PREFERRED SIZES ARE SHADED  
SIZE  
Soldering  
Packaging  
0201  
0402  
Reflow Only  
All Paper  
0603  
Reflow/Wave  
All Paper  
0805  
1206  
1210  
1812  
2220  
Reflow Only  
Reflow/Wave  
Reflow/Wave  
Reflow/Wave  
Reflow Only  
Reflow Only  
All Paper  
Paper/Embossed  
Paper/Embossed  
Paper/Embossed  
All Embossed  
All Embossed  
MM  
0.60 ± 0.03  
±.00 ± 0.±0  
(0.040 ± 0.004)  
±.60 ± 0.±1  
(0.063 ± 0.006)  
2.0± ± 0.20  
(0.079 ± 0.008)  
3.20 ± 0.20  
(0.±26 ± 0.008)  
3.20 ± 0.20  
(0.±26 ± 0.008)  
4.10 ± 0.30  
(0.±77 ± 0.0±2)  
1.70 ± 0.40  
(0.221 ± 0.0±6)  
(L) Length  
(in.) (0.024 ± 0.00±)  
MM  
(in.) (0.0±± ± 0.00±)  
MM 0.±1 ± 0.01  
(in.) (0.006 ± 0.002)  
0.30 ± 0.03  
0.10 ± 0.±0  
0.8± ± 0.±1  
±.21 ± 0.20  
±.60 ± 0.20  
2.10 ± 0.20  
3.20 ± 0.20  
1.00 ± 0.40  
(W) Width  
(0.020 ± 0.004)  
(0.032 ± 0.006)  
(0.049 ± 0.008)  
(0.063 ± 0.008)  
(0.098 ± 0.008)  
(0.±26 ± 0.008)  
(0.±97 ± 0.0±6)  
0.21 ± 0.±1  
(0.0±0 ± 0.006)  
0.31 ± 0.±1  
(0.0±4 ± 0.006)  
0.10 ± 0.21  
(0.020 ± 0.0±0)  
0.10 ± 0.21  
(0.020 ± 0.0±0)  
0.10 ± 0.21  
(0.020 ± 0.0±0)  
0.6± ± 0.36  
(0.024 ± 0.0±4)  
0.64 ± 0.39  
(0.021 ± 0.0±1)  
(t) Terminal  
WVDC  
±0  
4
6.3 ±0 ±6  
4
6.3  
±0  
±6 21 6.3 ±0 ±6 21 31 6.3 ±0  
±6 21 31  
4
6.3 ±0 ±6 21 31 6.3 ±0 ±6 21  
6.3  
Cap  
(pF)  
±00  
±10  
220  
330  
470  
680  
W
L
ꢀ
±000  
±200  
±100  
T
ꢀ
A
A
±800  
2200  
2700  
A
A
A
t
3300  
3900  
4700  
A
A
A
1600  
6800  
8200  
A
A
A
Cap.  
(µF)  
0.0±0  
A
0.0±2  
0.0±1  
0.0±8  
0.022  
0.027  
C
C
0.033  
0.039  
0.047  
C
C
C
C
C
C
0.016  
0.068  
0.082  
C
C
C
G
G
G
0.±0  
0.±2  
0.±1  
C
C
C
C
C
G
G
G
G
G
0.±8  
0.22  
0.27  
C
C
G
G
G
G
J
G
G
G
G
N
0.33  
0.47  
0.16  
G
G
G
G
G
G
G
G
G
N
N
N
N
N
Q
M
0.68  
0.82  
±.0  
G
G
G
G
G
G
G
G
G
N
N
N
N
N
M
M
C
N
Q
Q
±.2  
±.1  
±.8  
G
G
G
N
N
Q
Q
Q
2.2  
3.3  
4.7  
6.8  
G
N
N
N
Q
X
Z
Z
Q
Q
J
N
N
Q
Q
Q
Q
±0  
N
Q
Q
Q
Q
X
Z
Z
X
Z
X
Z
X
Z
22  
47  
Z
Z
BB  
±00  
Z
4
Z
WVDC  
±0  
4
6.3 ±0 ±6  
4
6.3  
±0  
±6 21 6.3 ±0 ±6 21 31 6.3 ±0  
±6 21 31  
6.3 ±0 ±6 21 31 6.3 ±0 ±6 21  
6.3  
SIZE  
0201  
0402  
0603  
0805  
1206  
1210  
1812  
2220  
Letter  
Max.  
Thickness (0.0±3)  
A
0.33  
C
0.16  
(0.022)  
E
0.7±  
(0.028)  
G
0.86  
(0.034)  
J
0.94  
(0.037)  
K
±.02  
(0.040)  
M
±.27  
(0.010)  
N
±.40  
(0.011)  
P
±.12  
(0.060)  
Q
±.78  
(0.070)  
X
2.29  
(0.090)  
Y
2.14  
(0.±00)  
Z
2.79  
(0.±±0)  
BB  
3.01  
(0.±20)  
CC  
3.±71  
(0.±21)  
PAPER  
EMBOSSED  
Contact Factory for Multiples  
17  

相关型号：

1206YD155MAT2A

 Capacitor, Ceramic, Chip, General Purpose, 1.5uF, 16V, ±20%, X5R, 1206 (3216 mm), Sn/NiBar, -55º ~ +85ºC, 7" Reel
KYOCERA AVX

1206YD225JAT2A

 Ceramic Capacitor, Multilayer, Ceramic, 16V, 5% +Tol, 5% -Tol, X5R, 15% TC, 2.2uF, Surface Mount, 1206, CHIP
KYOCERA AVX

1206YD225KAJ2A

 Ceramic Capacitor, Multilayer, Ceramic, 16V, 10% +Tol, 10% -Tol, X5R, 15% TC, 2.2uF, Surface Mount, 1206, CHIP
KYOCERA AVX

1206YD225KAT2A

 Capacitor, Ceramic, Chip, General Purpose, 2.2uF, 16V, ±10%, X5R, 1206 (3216 mm), Sn/NiBar, -55º ~ +85ºC, 7" Reel
KYOCERA AVX

1206YD225KAT4A

 Ceramic Capacitor, Multilayer, Ceramic, 16V, 10% +Tol, 10% -Tol, X5R, 15% TC, 2.2uF, Surface Mount, 1206, CHIP
KYOCERA AVX

1206YD225MAT2A

 Capacitor, Ceramic, Chip, General Purpose, 2.2uF, 16V, ±20%, X5R, 1206 (3216 mm), Sn/NiBar, -55º ~ +85ºC, 7" Reel
KYOCERA AVX

1206YD225MAT4A

 Capacitor, Ceramic, Chip, General Purpose, 2.2uF, 16V, ±20%, X5R, 1206 (3216 mm), Sn/NiBar, -55º ~ +85ºC, 13" Reel
KYOCERA AVX

1206YD226KAT2A

 General Purpose Dielectric for Ceramic Capacitors
KYOCERA AVX

1206YD226KAT4A

 Ceramic Capacitor, Multilayer, Ceramic, 16V, 10% +Tol, 10% -Tol, X5R, 15% TC, 22uF, Surface Mount, 1206, CHIP
KYOCERA AVX

1206YD226MAT2A

 38V, 10A DC/DC μModule Regulator with Advanced Input and Load Protection
Linear

1206YD226MAT2A

 Capacitor, Ceramic, Chip, General Purpose, 22uF, 16V, ±20%, X5R, 1206 (3216 mm), Sn/NiBar, -55º ~ +85ºC, 7" Reel
KYOCERA AVX

1206YD226MAT4A

 Ceramic Capacitor, Multilayer, Ceramic, 16V, 20% +Tol, 20% -Tol, X5R, 15% TC, 22uF, Surface Mount, 1206, CHIP
KYOCERA AVX
©2020 ICPDF网 联系我们和版权申明